Need help?Do you have a question about the Westermo EDW-100 and is the answer not in the manual?
General| Technology | Ethernet |
|---|---|
| Operating Temperature | -40 to +70°C |
| MTBF | 1, 000, 000 hours |
| Protection | IP40 |
| Standards | IEEE 802.3, IEC 61850-3, IEEE 1613 |
Guidelines for safe installation, emphasizing qualified personnel and proper wiring.
Precautions for safe handling, including disconnecting power and maintenance requirements.
Details the EDW-100 as an Industrial Ethernet to serial adapter supporting various protocols.
Explains point-to-point serial links, broadcast, and multicast using UDP/TCP.
Describes creating virtual COM ports for remote serial interface via TCP/IP.
Lists specific EMC phenomena, test standards, and test levels applied.
Explains configuration via web tool or hardware DIP-switches.
Enables users to define how serial data is encapsulated into TCP or UDP frames.
Highlights galvanic isolation for error elimination and redundant power for reliability.
Details configuring the IP address using the Web tool or a terminal program.
Describes connecting the unit via RS-232 and required cable types.
Details default and guest login credentials for configuration and diagnostics.
Details connecting, logging in, and using the wizard for parameter configuration.
Explains how to use Telnet for diagnostics and obtaining operational information.
Details the functions of S1 DIP-switches for Ethernet configuration and IP setup.
Details the functions of S2 DIP-switches for RS-422/485 termination.
To Next Page