EasyManua.ls Logo

Westfalia RBG 200 C User Manual

Westfalia RBG 200 C
21 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Westfalia Bedienungsanleitung
Nr. 108482
Question and Answer IconNeed help?

Do you have a question about the Westfalia RBG 200 C and is the answer not in the manual?

Westfalia RBG 200 C Specifications

General IconGeneral
BrandWestfalia
ModelRBG 200 C
CategoryGrinder
LanguageEnglish

Summary

Safety Notes

Personal Protective Equipment

Always wear safety goggles and suitable clothing to prevent injury from sparks and moving parts.

Grinding Wheel & Accessory Safety

Ensure grinding wheels and accessories fit precisely, use correct speed/size, and check for damage before use.

Safe Operation Practices

Maintain safe distances for guards, work supports, cables, and keep the area clear of hazards and personnel.

Rigging

Assembling and Setting Up

Ensure power is off before work. Attach visors and spark deflectors, and set work piece support distance.

Mounting to Work Bench

Use M6 screws to attach the grinder, aligning mounting holes with support slots for stability.

Grinding Wheel Replacement

Loosen hood screws and retaining nut to replace wheels. Check wheels for damage before mounting.

Operation

Intended Operation

The double grinder is designed for dry grinding of metal and hard metal using vitrified bonded wheels.

Grinding Process

Operate grinder with ON/OFF switch. Rest workpiece on support, avoid sharp angles, and cool workpiece if it heats up.

Trueing Grinding Wheels

Use a conditioner to true worn or untrue grinding wheel surfaces by holding conditioner against the wheel.

Maintenance

Grinding Wheel Classification

Understand the digit/number code on grinding wheels for material, grain size, quality, structure, and binder type.

General Maintenance Procedures

Pull plug before work. Do not disassemble or repair yourself; contact support for issues.

Pre-use Maintenance Checks

Before each use, check protective equipment, switch, cord, screws, alignment, and for damage or unusual sounds.

Cleaning the Unit

Keep the unit clean and dry using mild detergent and a moist cloth; avoid flammable solvents.

Technical Data

Electrical Specifications

Details voltage (230V), frequency (50Hz), speed (2950 RPM), rated power (250W), and protection class (I).

Grinding Wheel Specifications

Specifies wheel dimensions (200x20mm), bore size (16mm), and specification codes (A60PV, A36PV).

Physical & Performance Data

Includes cable type, weight (12kg), dimensions (WxHxD), vibration (1.53 m/s²), and sound levels (dB(A)).

EC Declaration of Conformity

Compliance Standards

Product complies with EU directives (EMC, Machinery) and harmonized standards, declared by manufacturer.

Customer Services and Disposal

Customer Service Contacts

Provides contact information (phone, fax, internet) for customer support in Germany, Austria, Switzerland, and the UK.

Product Disposal Guidelines

Advise to avoid waste and recycle components. Do not discard in household waste; use local recycling facilities.

Related product manuals