To Next PageTo Next Page
Need help?Do you have a question about the Westin T-Max REW-9000 and is the answer not in the manual?
Guidelines for safe attire and personal protection during operation.
Maintaining safe distances from the winch and cable during operation is crucial.
Proper handling and care of the winch cord to prevent damage.
Avoiding overloading the winch motor and adhering to its limits.
Ensuring the winch is disengaged when not in use.
Regular inspection of winch components for damage before use.
Using only identical replacement parts for winch repairs.
Recommended angle for pulling loads to avoid strain.
Correct procedure for winding the winch cable back onto the drum.
Managing cable lay on the drum to prevent pile-up and damage.
Proper storage of the remote control switch to prevent damage.
Correct procedure for engaging the winch clutch before spooling.
Avoiding connecting the hook back to the cable during winching.
Monitoring the winch operation and cable spooling at intervals.
Attaching tow hooks only to the vehicle frame, not winch apparatus.
Benefits and application of snatch blocks for recovery operations.
Using rated shackles with anchor points for safe recovery.
Ensuring sufficient cable wraps remain on the drum when extending.
Understanding the red cable mark indicating remaining wraps.
Maximizing pulling power by using maximum line length.
Preventing cable blinding by ensuring neat, tight spooling.
Ensuring the battery is in good condition and safe to use.
Checking the winch cable for damage and proper attachment.
Never attempt to exceed the winch's maximum pulling limits.
Do not use vehicle movement to assist the winch operation.
Understanding the hazards associated with shock loads during winching.
Guidelines for securely mounting the winch onto a suitable frame.
Specifications for manufacturing a custom winch mounting plate.
Using correct bolts and washers to secure the winch assembly.
Proper installation of the roller fairlead for even rope guidance.
Information on the winch's permanent lubrication and cable lubrication.
Procedure for unwinding and installing the new winch cable.
Methods for mounting the winch control box in various situations.
Recommendation to perform test runs for familiarization with winch operation.
Key steps and procedures for safe and effective winch operation.
How to engage and disengage the winch clutch for spooling and pulling.
Importance of rechecking all cable rigging before commencing winching.
Plugging in and using the winch hand control for safe operation.
Steps to start the winching operation, including engine and transmission.
Operating the remote control switch to retrieve the vehicle.
Critical notes on safe winching practices, including avoiding gear engagement.
Recommended monthly usage to keep winch components in good condition.
Data on line speed and current draw at different load levels.
Information on rated line pull and cable capacity per layer.
Physical dimensions of the PEW-9000 winch unit.
Specifications for the winch's mounting bolt pattern.
List of components and their part numbers for the PEW-9000 winch.
Visual representation of the winch parts and their assembly order.
Comprehensive breakdown of winch components with part numbers.
Data on line speed and current draw at different load levels.
Information on rated line pull and cable capacity per layer.
Physical dimensions of the PEW-9500 winch unit.
Specifications for the winch's mounting bolt pattern.
List of components and their part numbers for the PEW-9500 winch.
Visual representation of the winch parts and their assembly order.
Comprehensive breakdown of winch components with part numbers.
Data on line speed and current draw at different load levels.
Information on rated line pull and cable capacity per layer.
Physical dimensions of the PEWI-9500 winch unit.
List of components and their part numbers for the PEWI-9500 winch.
General
