Westward Broadcast Spreader - Page 3

3
10F635 Westward Operating Instructions and Parts Manual
60 Lb. Broadcast Spreader
STEP 1：
1. Attach the connecting rod to the hopper
assembly by using the M6x35 carriage
bolts and tighten by hand or with a pair
of pliers the M6 wing nuts. Do not over
tighten.
2. Attach the handle to the connecting rods
using the M6x35 carriage bolt and
tighten by hand or with a pair of pliers
the M6 wing nuts. Do not over tighten.