+
-
3/16” Allen Wrench
B
Ack
V
iew
DO NOT
EXCEED 300 FPS!
IVG should not be deeper
than 1/4” — 1/2” inside
of receiver
III. VELOCITY
To Adjust Velocity:
1. Remove the cocking rod by unscrewing it counterclockwise.
2. Insert the provided 3/16” Allen wrench in place of the cocking rod so that it passes through
the IVG (Internal Velocity Governor). Turning the Allen wrench clockwise will increase the
velocity while counterclockwise will decrease the velocity.
3. Movement of the wrench quarter turn in either direction will change your velocity approxi-
mately 15-20 fps (feet per second).
Be sure the entire
cocking rod
comes out
when you
unscrew it
from the
marker
To Next Page
Loading...