To Next Page
R
RomanJun 5, 2025
how to connect remotely with this watch? Via software or via web browser? Thanks
how to connect remotely with this watch? Via software or via web browser? Thanks
Details the operational capabilities and technical specifications of the master clock system.
Lists all the items included in the product package upon purchase.
Addresses common user queries and provides solutions to potential issues.
Explains the interactive menu structure used to configure the master clock's various settings.
Provides a detailed step-by-step guide for manually setting the clock's time and date.
Describes the function for programming leap second adjustments to maintain time accuracy.
Details the general system configuration options available for the master clock.
Instructions for correctly connecting the master clock to its power source.
Information on the battery backup system and its operational period.
Overview of the input and output ports available on the rear of the unit.
Procedure for setting the master clock's location to ensure correct time zone referencing.
Explains how to define custom time zones and daylight saving changes.
Guide to setting up time synchronisation using GPS satellite signals.
Details the installation steps for the 488HS and 488B GPS receiver systems.
Covers time synchronisation methods using MSF and DCF radio signals.
Guidelines for installing the 484 series radio time code receivers.
Procedures for aligning radio receivers to optimize signal reception.
Step-by-step guide to configuring w482 time zone settings for slave clocks.
Explains the operation of the serial data output ports for time synchronization.
Procedure for selecting and programming serial output message formats.
How to reference serial outputs to local time or UTC.
Describes the functionality and rated capabilities of the relay output.
Procedure to program the relay's activation time and operational mode.
Initial steps for configuring network settings on the 4860net device.
Explains how the 4860net functions as a Network Time Server.
Basic explanation of TCP/IP networking, IP addresses, subnets, and gateways.
Configuration options and procedures for IRIG time code output.
How to reference IRIG output to location or UTC time settings.
Information on using the S1 serial output for transmitting IRIG data.
Configuration settings for various EBU time code output formats.
The overall procedure to commission the impulse clock system for operation.
Initial setup steps required before synchronising impulse clocks.
Procedure to ensure all connected slave clocks synchronise together correctly.
How to program the correct impulse time for analogue slave clocks.
Procedure to initiate the impulse output signal to the connected clocks.
How to interpret LEDs and displays for impulse output status and potential errors.
Cable specifications for connecting to 488HS/488B GPS receiver systems.
Cable specifications for connecting to 484 MSF and DCF radio receivers.
Cable specifications required for the w482 time code system.
Cable specifications for connecting analogue impulse slave clocks.
Physical dimensions and mounting details for the 1U rack-mount models.
Physical dimensions and mounting details for the table-top models.
Lists compatible VCRs and digital recorders for time synchronisation.
Initial steps for configuring NTP synchronisation on 4860netclient.
Explains how the 4860netclient utilizes NTP for time synchronisation.
Details the network settings specific to NTP synchronisation for the client.
General
