What to do if WhatsGPS GPS fails to start the car?
If your WhatsGPS GPS device fails to start the car, it might be due to a power cutoff or an ACC abnormality. Restore the power or check the ACC to resolve this.
Why does my WhatsGPS GPS car stop driving?
If your WhatsGPS GPS car stops driving, it's likely due to an abnormal power supply. To fix this, connect the device's negative electrode to a constant power source.
What to do if WhatsGPS GPS is offline?
If your WhatsGPS GPS device is offline or the indicators are off, it could be due to an abnormal power supply or the indicators being in sleep mode. Check the power supply. If the indicators are off, try pressing the side key to activate them.
What to do if WhatsGPS GPS is unable to locate?
If your WhatsGPS GPS is unable to locate, it may be due to the signal being shielded or a poor signal. Try changing the installation location to a place with a better signal.
Why is my WhatsGPS GPS unable to connect to the network?
If your WhatsGPS GPS is unable to connect to the network, it's likely due to a poor signal. Try using the GPS tracker in a location with good signal conditions.
Lists the items included with the GPS tracker, such as the main device, power cord, and cables.
Details the primary capabilities of the GPS vehicle tracker, including real-time tracking and remote control features.
Outlines the technical details of the device, such as frequency bands, operating voltage, location accuracy, and dimensions.
Explains how to connect the device's cables, including wiring diagrams and color coding for sensors and power.
Describes the meaning of different LED light patterns and their corresponding device statuses, like networking or data sending.
Provides guidance on the physical installation of the GPS tracker within a vehicle.
Details the procedure for turning the GPS tracker on and off, including initial power-on indicators.
Explains how to activate the SOS alarm and the actions the device takes upon activation, including notifications.
Describes the device's response when the power supply is interrupted, triggering an alert.
Details how the device alerts the user when its internal battery level is low.
Explains how the device detects vibrations and triggers an alarm, especially when the vehicle is not in use.
Covers the remote command to cut off or restore vehicle oil/electricity, detailing operational conditions and notices.
Explains how to send commands to restore the vehicle's oil or electricity supply after it has been cut off.
Provides instructions on how to restart the device using an SMS command, particularly when GPRS is abnormal.
Guides users on setting the Access Point Name (APN) and server details for normal network operation.
Instructs users on where and how to download and install the mobile application for the GPS tracker.
Lists SMS commands for various functions like setting IP, APN, upload interval, and SOS numbers.
Addresses issues related to poor GPS signal reception and provides solutions for better connectivity.
Diagnoses why the device may not be booting up and suggests charging the battery as a solution.
Solutions for problems like unable to connect to the network or locate the device due to signal or placement.
Troubleshooting for power-related alarms, failure to start, car stopping, and offline indicators.
Details the conditions required for the warranty to be valid, including proof of purchase and original information.
Outlines the company's obligations for repair or replacement and specifies that repairs must be done by authorized centers.
Provides sections for recording maintenance details such as shop, date, fault description, and person responsible.
To Next Page
General
