Need help?Do you have a question about the Wheel Horse D-160 and is the answer not in the manual?
General| Brand | Wheel Horse |
|---|---|
| Model | D-160 |
| Category | Tractor |
| Language | English |
Details engine models, displacement, bore, stroke, and ignition types.
Outlines transmission types, speeds, and ground speed ranges for different models.
Details tractor electrical system types, alternator, and battery specifications.
Lists tire sizes and pressure specifications for various tractor models.
Provides physical dimensions, wheelbase, turning radius, and dry weight for each model.
Lists engine tune-up parameters including point gap, spark plug gap, and timing.
Details fluid capacities for crankcase, transmission, and fuel tank, plus chassis zerk fittings.
Covers PTO brake adjustment and front wheel alignment specifications for specific models.
Provides essential safety guidelines for operating the tractor and its attachments.
Covers safety recommendations specific to riding vehicles, including fuel handling and indoor operation.
Highlights critical safety reminders such as keeping shields in place and stopping the engine before servicing.
Explains where to find tractor and engine identification plates for reference.
Details the importance of the Owner Identification Card for warranty service.
Informs about obtaining a separate parts manual for the equipment.
Identifies key controls and instruments located on the steering wheel and dash panel.
Highlights the location and function of various pedals and levers on the B-Series tractor.
Explains the engine speed throttle and cold start choke controls.
Details the ignition switch and PTO clutch lever functions.
Describes the operation and safety interlocks of the brake and clutch pedals.
Covers gear selection, range adjustment, and parking brake operation.
Mentions the light switch and fuel shut-off valve locations and functions.
Explains the ammeter gauge and throttle control for engine speed.
Details the choke control and brake pedal operation for 8-speed models.
Covers clutch pedal functions and the brake/neutral pedal for automatic models.
Explains PTO clutch, gear shift, and range selector operations.
Details motion control and transmission clutch levers for automatic models.
Describes manual and hydraulic lift lever operations for attachments.
Covers light switch, ignition, fuel valve, and fuel gauge functions.
Explains the ammeter and transmission oil temperature gauge functions.
Details the engine oil pressure gauge specific to D-200 models.
Covers choke, throttle, and brake/neutral pedal operations.
Explains PTO controls and the motion control lever for tractor movement.
Details parking brake operation and hydraulic lift levers.
Covers light switch, ignition, fuel gauge, and fuel shut-off valve functions.
Explains the safety interlock system for preventing operation errors.
Provides the startup procedure for 6 & 8-speed transmission models.
Details the startup procedure for automatic transmission models.
Offers guidance on pre-operation checks and safety during engine use.
Warns about the dangers of inhaling exhaust gases and carbon monoxide.
Outlines the steps to safely stop the tractor engine.
Explains the throttle control's role in engine speed regulation.
Describes the choke control's butterfly valve function for fuel mixture.
Specifies fuel type, refueling precautions, and recommended engine oil.
Provides specific warm-up procedures for automatic transmissions in cold weather.
Explains how to move the tractor forward using the motion control lever.
Describes how to move the tractor in reverse using the motion control lever.
Explains methods for stopping the tractor using motion control or brake pedal.
Details the operation of the push valve for manually moving the tractor.
Describes the cooling fan's role in D-Series transmission temperature regulation.
Guides on operating 6 & 8-speed transmissions for forward, reverse, and stopping.
Instructs on changing gears or direction safely.
Explains easy installation and removal of B-Series attachments.
Details the Tach-a-matic hitches for easy attachment mounting/removal.
Covers the installation and removal of attachment belts on D-Series tractors.
Details the procedure for installing attachment belts on C-Series tractors.
Provides guidance on operating the mower for best results and safety.
Offers safety precautions and operating tips for snowthrowers.
Covers safe operation of the front end snow blade for snow removal.
Details operation of dozer/grader blades for snow or earth moving.
Guides on using the tiller for garden preparation and safety precautions.
Explains how to use plows, discs, cultivators, and harrows for seed bed preparation.
Covers operation of attachments using a drawbar for towing or power.
A checklist of service operations and their recommended intervals.
Details recommended oil types and how to check the engine oil level.
Specific instructions for checking engine oil on B-Series tractors.
Specific instructions for checking engine oil on C-Series tractors.
Specific instructions for checking engine oil on D-Series tractors.
Provides guidelines for changing engine oil at recommended intervals.
Details how to replace the oil filter on D-Series tractors.
Lists crankcase oil capacities for different tractor models.
Recommends oil viscosity based on air temperature for different engine types.
Specifies API service classifications for engine oil based on manufacturer.
Details how to replace the oil filter on D-Series tractors.
Explains how to clean and service the foam element air filter on B-Series models.
Details cleaning and replacing dry type air filter elements for C & D-Series.
Covers checking, replacing, and gapping spark plugs for optimal engine performance.
Discusses the importance of breaker points and condenser for engine operation and service.
Explains when and why carburetor adjustment might be needed, and suggests dealer service.
Details the function and service requirements of the fuel filter.
Introduces the alternator, battery, and fuses in the charging system.
Explains the alternator's role and proper service precautions.
Identifies fuses for the electrical system and light circuits.
Provides essential safety and maintenance guidelines for the tractor battery.
Details procedures for replacing headlight and tail light bulbs.
Recommends premium quality oil for the hydrostatic transmission.
Explains how to check and maintain the automatic transmission oil level.
Guides on draining and refilling the automatic transmission oil annually or at 100 hours.
Instructs on replacing the transmission oil filter with each oil change.
Details cleaning the cooling fan guard on D-Series tractors.
Specifies oil requirements and checking procedures for 8-speed transmissions.
Notes that the 6-speed transmission is packed with grease and requires no lubricant checks.
Explains how to lubricate steering gear, spindles, and wheel bearings using a grease gun.
States that 6-speed disc brakes are self-compensating and require dealer service if issues arise.
Provides instructions for adjusting the brake band on 8-speed models.
Details brake band adjustment for automatic models and their parking brake function.
Outlines the procedure for adjusting the PTO clutch and brake on B-Series tractors.
Explains how to adjust the PTO clutch on C-Series models if slippage occurs.
Details the steps for adjusting the PTO brake pad on C-Series tractors.
Describes how to adjust the PTO brake on D-160 models.
Details the procedure for adjusting the PTO clutch on D-200 models.
Provides instructions for adjusting the PTO brake on D-200 models.
Covers cleaning and relubricating the PTO clutch on D-200 models.
Explains how to remove and replace clutch components on D-200 models.
Details how to adjust the seat position on C & D-Series tractors.
Provides guidelines for cleaning, waxing, and storing the tractor.
Lists causes and remedies for an engine that fails to crank.
Addresses issues when the engine cranks but doesn't start.
Covers common reasons for difficult engine starting.
Discusses problems with erratic engine operation.
Explains potential causes for engine knocking and skipping at speed.
Lists causes and remedies for engine overheating.
Covers issues related to poor engine idling and backfiring.
Discusses problems with tractor movement, power loss, or overheating.
Addresses situations where the engine stalls when the PTO is engaged.
Provides the electrical wiring diagram for various C-Series tractor models.
Presents the electrical wiring diagram specific to the D-160 tractor model.
Shows the electrical wiring diagram for the D-200 tractor model.
Provides instructions and a form for ordering a separate parts manual.
To Next Page
