Disclaimer:
The manufacturer and distributor of the tire bead breaker are not liable for any injuries, damages, or
fatalities resulting from improper use, maintenance, or failure to follow these safety guidelines. By using
the tire bead breaker, you accept full responsibility for any risks and agree to use the equipment safely and
responsibly.
Stay safe and ensure that all safety measures are strictly followed to prevent accidents and injuries.
Process of use:
1. Deflate tire remove all wheel balance weights.
2. Lubricate both beads of tire with approved rubber lubricant.
3. Place wheel under bead breaker. Position bead breaker ram with bead breaker spade under the rim
flange.
4. Operate air valve, break bead, rotate wheel and repeat operation for opposite bead.
Technical specifications
Working Height: 800 mm
Floor Area: 585 x 485 mm
Working Pressure: 80 to 120 PSI
Weight: 60 kg
Note: Connect to clean dry airline with oil lubricator
To Previous Page
Loading...