ENGLISH: Instructions for Attaching Facebow Transfer Assembly
2
Intended Use: A face-bow is a dental instrument used in the eld of
prosthodontics. Its purpose is to transfer functional and aesthetic components from
patient’s mouth to the dental articulator.
Facebow Registration:
Items needed for a facebow
registration
(Figure 1)
1. Facebow with nasion relator assembly,
transfer jig, and bitefork
2. Wax or bite registration material
3. Rubber band (optional)
Preparing Facebows
1. Clean and properly disinfect the plastic
ear pieces before each use. If replacing
them, make sure the hole on the at
side of each is above the side arm, and
the plastic is seated until it touches the
shoulder of the arm.
2. Attach the transfer jig to the facebow and
tighten thumb screw on top.
(Figure 2 and 3)
Fig. 1
Fig. 2
Fig. 3
To Next Page
Loading...