Whipple TOMAHAWK V1 User Manual

Instruction Manual: Whipple Tomahawk_R2
Last Updated: December 11
th
, 2017
Page 1 of 3
www.whipplesuperchargers.com
WHIPPLE TOMAHAWK INSTRUCTION MANUAL
2017 AND UP FORD F150/GT350
2018 AND UP FORD MUSTANG
INTERNET ACCESS REQUIRED
SD MEMORY CARD READER REQUIRED
The Whipple calibration procedure is based off factory calibration files. If you have an aftermarket
calibration, put the calibration back to STOCK. The TOMAHAWK will not upload and backup your file. Stock
files are available upon request.
WHIPPLE SUPERCHARGERS
3292 NORTH WEBER AVE
FRESNO, CA 93722
TEL 559.442.1261
FAX 559.442.4153
www.whipplesuperchargers.com
A color PDF of this manual is available, email
tech@whipplesuperchargers.com for a copy
tuning@whipplesuperchargers.com for calibrations
PREMIUM FUEL ONLY (91 OCTANE OR BETTER ALWAYS) RON+MON/2

Whipple TOMAHAWK V1 Specifications

General

Brand	Whipple
Model	TOMAHAWK V1
Category	Automobile Accessories
Language	English

Summary

Calibration File Acquisition Process

Connecting Tool and Requesting Calibration

Connects the tool to OBD2, requests calibration file, and details the email submission process for TOMAHAWK.REQ.

Receiving and Loading Calibration Files

Explains receiving TOMAHAWK.BIN and APP.LDR files and loading them onto the supplied SD card.

Vehicle Programming and Calibration

Connecting for Vehicle Programming

Connects the Tomahawk tool to the factory OBD2 port in the run/accessory position for programming.

Flashing the Vehicle

Selects the 'Programming' tab and follows onscreen menu instructions for flashing the vehicle.

Post-Flashing Procedures

Clearing Diagnostic Trouble Codes

Cycles key, reads DTCs, erases codes, noting common relay codes that resolve over time.

PCM Relearn Procedures

Performs crank/profile relearn if misfires or hard starting occur, ensuring engine is at normal operating temp.

Adjusting Tire and Axle Ratios

Adjusts axle ratio and tire size (circumference in MM) via the Diagnostic tab after flashing.