EasyManua.ls Logo

Whirlpool ED19AK - Install Properly; Level Refrigerator-Freezer; Plug It In

Whirlpool ED19AK
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Install Properly...
1. Allow 1 2 inch (1 3 cm] space between counters
and cabinets and the sides and top of the re-
frigerator for ease of ~nstollatton
2 If the refngerator 1s to be against a wall, you might
want to leave enough space so the door can be
opened wider
3 The refrigerator back can be flush against the
wall
level Refrigerator-Freezer...
Leveling SKa~
1
Use Screwdriver
Left to Lower
1 Remove base grille [see page 6)
2 To raise front, turn each screw to the right
3 To lower front, turn each screw to the left
4 Check with level
Remove Sales labels...
Remove the Consumer Buy Guide !obel and any
InsIde sales labels before using the refrigerator Re-
move any left over glue with rubbing alcohol
Clean It...
Clean your refrigerator before using it See clean-
ing InstructIons on page 7
Plug It In...
Z--prong
grounding type
wall receptacle
Refrigerator
Power Cord
Recommended
Grounding Method
A 115 Volt,60 Hz., AC only, 15or 20 ampere fused and
grounded electrlcal supply IS required It IS recom-
mended that a separate circuit serving only this
appliance be provided.
Do not use an extension cord. Use a recepta-
cle which cannot be turned off with a switch or
pull chain.
See individual electrlcal requirements
and grounding instruction sheet In your Ilterature
package.

Related product manuals