Need help?Do you have a question about the Whirlpool GSS26C5XXY and is the answer not in the manual?
General| Type | Side-by-Side |
|---|---|
| Configuration | Side-by-Side |
| Product Type | Refrigerator |
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Energy Star Certified | Yes |
| Depth | 33.5 inches |
| Width | 35.75 inches |
Outlines the purpose and learning objectives of the job aid.
Explains safety symbols, warnings, and basic precautions for safe operation.
Lists the physical dimensions of the 26-inch SXS refrigerator.
Explains the meaning of each part of the SXS refrigerator model number.
Explains the functionality and routines of the 6th Sense software.
Provides step-by-step instructions for removing, leveling, and aligning refrigerator doors.
Details the process of safely removing the refrigerator and freezer doors.
Explains how to reassemble the doors and hinges after removal.
Guides on how to adjust the refrigerator's tilt for proper door closure.
Provides steps to align the refrigerator doors if they appear uneven.
Instructions for installing the refrigerator door handles.
Steps for removing the base grille of the refrigerator.
Instructions for safely removing the freezer door.
Details on how to remove the upper hinge of the freezer door.
Overview of components within the refrigerator compartment.
Steps for disassembling components within the refrigerator compartment.
Instructions for disassembling the water filter housing.
Explains the function and location of the refrigerator thermistor.
Details how to check the resistance of the refrigerator thermistor.
Steps for replacing the refrigerator thermistor.
Steps to access and remove the water reservoir.
Overview of components within the freezer compartment.
How to check the resistance of the freezer thermistor.
Steps for replacing the freezer thermistor.
Steps to access various components within the freezer compartment.
Identifies key components within the evaporator assembly.
Instructions for removing the evaporator fan motor.
How to check the resistance of the evaporator fan motor.
How to check the defrost bimetal for continuity.
How to check the resistance of the defrost heater.
Steps for replacing the defrost heater.
Identifies components located within the freezer door.
Lists specifications for the ice maker.
Explains the function of the ice maker emitter and receiver boards.
Identifies components related to the ice maker fill tube and ice maker.
Steps to access and remove the new in-door ice maker.
Identifies parts of the new six-cavity ice maker.
Instructions for disassembling the ice maker module from the head.
Provides specifications and checks for the modular ice maker.
Details voltage checks for the ice maker module.
Instructions for adjusting the water level in the ice maker.
Step-by-step procedure for diagnosing ice maker issues.
Steps for replacing the thermostat in the ice maker.
Instructions for replacing the auger motor and associated parts.
Steps for removing the auger motor.
Explains the condensate drain for the auger motor housing.
How to check the resistance of the auger motor.
Steps for removing the ice maker emitter and receiver boards.
Illustrates the routing of water tubes for the refrigerator.
Overview of the Stealth user interface display and icons.
Explains how the dispenser control panel enters sleep mode.
States the factory recommended temperature settings for refrigerator and freezer.
Instructions to view and enter temperature adjustment mode.
Guides on how to adjust refrigerator and freezer temperature set points.
Details on adjusting temperature settings using the LOCK and MAX ICE pads.
Steps to adjust the freezer temperature setting.
Explains the ice dispenser operation, including ice types and noise.
Explains the Max Ice feature for increased ice production.
How to control the dispenser light settings (ON, DIM, OFF).
Details the Door Open Alarm feature and its behavior.
How to lock and unlock the dispenser controls for safety or cleaning.
Instructions for turning the cooling system off and on.
Explains the water filter status indicators and how to reset them.
Instructions for entering, operating, and exiting showroom mode.
Steps to access the user interface and dispenser components.
Steps for removing and replacing the dispenser motor.
How to remove the dispenser door for replacement.
Overview of components located in the machine compartment.
Steps to remove the start module.
Explains the operation of the compressor starting device (overload and PTC relay).
How to check the PTC device for proper resistance.
Steps to access and remove the dual water valve.
Instructions for removing the condenser fan motor.
Steps to remove the entire condenser fan assembly.
Information about the drain pan and its mounting.
Details about the front wheel assembly and how to remove it.
Steps to access and replace the control and power supply boards.
Electrical schematic showing component connections and wiring.
Lists test points for voltage measurements during diagnostics.
Lists voltage test points for the Gemini Flash control system.
Lists voltage test points for the Stealth control interface.
Lists voltage test points for ice maker receiver and emitter boards.
Provides a table of resistance values for thermistors at different temperatures.
Instructions on how to enter and exit service diagnostic mode.
Diagram showing diagnostic mode switch functions.
Details diagnostic routines for the dispenser user interface and components.
Contact details for product specifications and technical assistance in the US.
Contact details for product specifications and technical assistance in Canada.
To Next Page
