Operating Instructions
SLEEP mode
SLEEP mode
SLEEP mode can be set in COOLING HEATING or DRYING operation mode.
This function gives you a more comfortable environment for sleep.
In SLEEP mode,
The appliance will stop operation automatically after operating for 8 hours.
Fan speed is automatically set at low speed.
*Set temperature will rise by 1ć if the appliance operates continuously in
mode for 2 hours constantly, then remains steady.
*Note: In cooling mode, if room temperature is 26ćor above, set temperature
will not change.
Note: Heating is NOT available for cooling only air conditioner.
TURBO mode
TURBO mode
Turbo mode is used to reduce the temperature of your room at the
highest possible rate, by operating at highest fan speed and changing the
set temperature to 18ć.
In TURBO mode, you can set airflow direction or timer. If you want to
escape from TURBO mode, press TURBO , MODE, FAN, ON/OFF,SLEEP
or TEMPERATURE SETTING button, the display will return to the original
mode.
*Note:
6TH SENSE button is not available in TURBO mode.
The Appliance will continue working in TURBO mode , if you don't exit from it by
pressing any of the buttons mentioned above.
11
cooling
To Next Page
Loading...
