Whirlpool SideKicks EL88TRRWQ User Manual

SideKicksTM
®
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
LOCATION REQUIREMENTS
EV188NYWS / EL88TRRWS
EV188NYWQ / EL88TRRWQ
Because Whirlpool Brand policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. M08.027.0
11-20-08
Depth Cabinet Height Width
“A” “B” “C”
EV188NYWS / EL88TRRWS
31.0”
31.0”
66.6”
66.6”
60.0”
60.0”
Electrical: A 115 Volt, 60 Hz., AC only 15 or
20 amp fused (or circuit breaker), grounded
electrical supply is required. It is recom-
mended that a separate circuit serving the
freezer and a separate line serving the
refirgerator be provided. Use an outlet that
cannot be turned off by a switch. Do not use
an extension cord.
Water Supply: Connect the optional ice
maker to a cold water line with water pressure
between 30 and 120 psi.
B
including
handle
A
®
IMPORTANT: Do not install the appliances near an oven, radiator, or other heat
source, nor in a location where the temperature will fall below 40°F (5°C).
C
Model
EV188NYWQ / EL88TRRWQ
Width “C” includes recommended spacing (0.25 in.) between refrigerator and freezer

Whirlpool SideKicks EL88TRRWQ Specifications

General

Brand	Whirlpool
Model	EL88TRRWQ
Category	Refrigerator
Type	Side-by-Side
Color	White
Energy Star Rated	Yes
Energy Star Certified	Yes
Width	30 inches
Height	66.25 inches
Depth	31.25 inches
Defrost Type	Frost-Free

Summary

Product Model Information and Requirements

Electrical Supply Specifications

Details required electrical supply: 115 Volt, 60 Hz, 15 or 20 amp fused or circuit breaker, grounded.

Water Supply Connection for Ice Maker

Connects the optional ice maker to a cold water line with pressure between 30 and 120 psi.

Overall Dimensions and Specifications

Appliance Dimensional Data

Provides depth (A), cabinet height (B), and width (C) for specific models, including spacing notes.

Location Requirements and Guidelines

Installation Environment Precautions

Important: Do not install near heat sources or in locations below 40°F (5°C).