Whirlwind IMP 2 User Manual (English)

WHIRLWIND IMP2

PARALLEL HIGH Z IN/OUT (1/4” Jacks)

Two 1/4” jacks which provide the means to input and “loop through” the source signal.

These jacks are wired in parallel, it makes no difference which one is used for input or

output.

LOW Z OUTPUT (XLR Jack)

A male XLR that provides a low-impedance (150 Ohms), balanced output suitable for

connection to a mixing console.

GND/LIFT (Switch)

Disconnects the ground between the input and the XLR output when set to the “LIFT” position.

Ground remains connected when set to the “GND” position.

This product is warranted to be free of defects in materials or workmanship to the original

purchaser for a period of 3 years from the date of purchase. Should warranty service be

required, return the unit postage paid along with the original sales receipt to:

Whirlwind Music Dist., Inc.

99 Ling Road

Rochester NY 14612

Whirlwind will, at its option, repair or replace the unit. This warranty does not cover damage

resulting from abuse, unauthorized modifications or use of the product in unintended

applications.

Need help?

Do you have a question about the Whirlwind IMP 2 and is the answer not in the manual?

Whirlwind IMP 2 Specifications

General

Type	Direct Box
Input Connector	1/4" TS
Output Connector	XLR
Ground Lift	Yes
Output Impedance	150 ohms
Signal to Noise Ratio	>100dB
THD	<0.05%
Power	Passive (no external power required)
Frequency Response	20Hz-20kHz ±1dB

Two 1/4” jacks wired in parallel for input and loop-through signal, offering flexible connection options.

A male XLR connector providing a low-impedance, balanced output suitable for connecting to a mixing console.

Switch to disconnect signal ground, preventing hum. Default position is 'GND' (connected).

Warrants product to be free of defects for 3 years from purchase date. Proof of purchase is required.

Return unit postage paid with original sales receipt to Whirlwind Music Dist., Inc.

Excludes damage from abuse, unauthorized modifications, or use in unintended applications.