Need help?Do you have a question about the White's MX5 and is the answer not in the manual?
General| Brand | White's |
|---|---|
| Model | MX5 |
| Category | Metal Detector |
| Language | English |
Controls unit power on/off and suspends operation.
Enables/disables Beach mode, useful for salt water environments.
Cycles through Sensitivity, Volume, Threshold, and Tone ID adjustments.
Controls the responsiveness of the metal detector to target signals.
Adjusts the loudness of the target response audio.
Sets the loudness of the background hum for audio detection.
Selects different audio tones for target identification.
Allows acceptance or rejection of targets based on VDI response segments.
Primary search mode for general hunting, with default settings for normal soil and iron discrimination.
Designed for wet salt sand and conductive ground, expanding ground tracking range.
Disables discrimination, accepts all targets, requires coil motion for response.
Used for precise target location; locks ground tracking and turns off SAT.
Explains the Visual Display Indicator scale and its numeric representation of target responses.
Uses VDI numbers and a cursor to indicate target type and location.
Provides different audio tones based on target VDI ranges and discrimination settings.
Explains the automatic ground tracking system and its benefits for performance and depth.
Covers VCO audio for enhanced faint target detection and non-VCO loudness response.
Advises on setting sensitivity for smooth operation, avoiding chatter and overload.
Explains the unique responses of steel bottle caps and how to recognize them.
Discusses the balance between depth, sensitivity, and target separation based on coil size.
Explains how to use Pinpoint mode to determine target size and exact location.
Provides guidance on proper digging techniques to minimize ground disturbance and damage.
To Next Page