White-Westinghouse WNGC90JFR User Manual (English)

Questions and Answers:

K
Kimberly ArroyoAug 3, 2025
What to do if the flame extinguishes immediately after ignition in White-Westinghouse WNGC90JFR Oven?
- J
  Jennifer BlackwellAug 3, 2025
  If the flame extinguishes immediately after ignition in your White-Westinghouse oven, consider these potential causes: * The hob might not be correctly connected to the electrical supply. Check the connection, referring to the connection diagram. * The burner cap and crown might be incorrectly placed. Ensure they are correctly positioned. * The thermocouple might not be heating up sufficiently. After lighting the flame, keep the spark generator activated for up to 10 seconds.
F
Frances BatesAug 10, 2025
What to do if there is no spark when activating the spark generator in White-Westinghouse Oven?
- J
  Jerry CohenAug 10, 2025
  If there's no spark when you try to activate the spark generator in your White-Westinghouse oven, check the following: * Ensure the hob is correctly connected to the electrical supply, consulting the connection diagram. * Check if the fuse has released. If it repeatedly releases, contact a qualified electrician.
M
Marissa PetersAug 18, 2025
Why is the flame ring uneven on my White-Westinghouse Oven?
- M
  Mark Cruz PhDAug 18, 2025
  An uneven flame ring on your White-Westinghouse oven usually indicates that the burner crown is blocked with food residues. Ensure the injector is not blocked and that the burner crown is clean.
J
James MeyersAug 26, 2025
Why is the lamp not working in my White-Westinghouse WNGC90JFR Oven?
- A
  Alexis WrightAug 26, 2025
  If the lamp in your White-Westinghouse oven isn't working, the lamp is likely defective and needs to be replaced.