White’s Electronics Quantum II - User Manual

Details on using standard AA batteries for detector power.

Step-by-step guide for installing standard AA batteries into the detector.

Information on compatible rechargeable battery systems for the detector.

Notes on battery voltage, memory retention, and troubleshooting.

Initial steps for turning on and preparing the metal detector for use.

Details on the three factory preset search programs: Coin, Coin & Jewelry, Relic.

Guidance on how to retain custom settings during temporary breaks.

Explains the ARROW key's function to recall the last adjustment screen.

Importance and procedure for re-ground balancing the detector.

Instructions for pinpointing the exact location of a detected target.

Access point for detector program settings and various adjustments.

Guides on using controls to change detector settings and parameters.

Explains how to toggle features like Discrimination ON/OFF.

Describes navigating through menus using the ARROW controls.

Shortcut to quickly return to the last adjustment screen.

Explains quick access functions for frequently used adjustments.

Provides a summary of adjustment parameters and their typical ranges.

Adjusting the audio loudness for detected targets.

Setting the background hum level for optimal sensitivity.

Controls detector responsiveness to signals and detection depth.

Adjusts display contrast for readability in various light conditions.

Procedure to adjust display visibility in extreme temperatures.

Alters operating frequency to avoid interference from other detectors.

Enables or disables the detector's trash rejection feature.

Assigns a higher pitch to coin zones for easier identification.

Customizes target acceptance or rejection for specific zones.

Settings optimized for general coin and jewelry hunting.

Settings with less discrimination for jewelry and varied alloys.

Settings for detecting all types of metals, including iron and relics.

Instructions for cleaning the detector components.

Precautions regarding detector exposure to extreme weather conditions.

Specific cleaning advice for saltwater exposure to the detector.

Guidelines for safely storing the detector when not in use.

Warnings against dropping, using lubricants, or modifying the detector.

Information on obtaining factory authorized service for the detector.

Steps to take before sending the detector for repair.

Information on various search coil types and their specific uses.

Benefits and recommendation of using headphones with the detector.

Types of protective cases for storing and transporting the detector.

Details on optional rechargeable battery systems available for the detector.

Advice on selecting appropriate tools for digging targets.

Information on protective rain covers for the detector's control box.

Terms and conditions of the product's limited manufacturer warranty.