OPERATION: YourWICO joystick offers three unique operational features:
INTERCHANGEABLE GRIPS - All three grips are designed to slide
easily on and off the steel joystick shaft. When mounting the Bat
Handle or Grip Handle, be sure to pull the grip as far down the
shaft as possible - the rubber 0-ring, located about 2/3 of the way
down the shaft, provides all the tension necessary to lock the
handle in place. When mounting the Red Ball, just pull it down
on the shaft until it clicks, locking into place. The fire button
should clear the top of each handle by approximately 3/16!’
4-WAY/8-WAY GATELOCK CONTROL - This feature improves play
on games requiring 4-way control only — maze games, for example.
When playing this type of game, rotate the dial at the base of the
grip until the “ 4” is directly over the arrow marked “ gatelock”
(see diagram). For games requiring control in all 8 directions,
rotate the dial to the "8” position.
FIRE 1/FIRE 2 SELECTOR SWITCH - In the “ Fire 2” position, both
joystick fire buttons are operational. In the “ Fire 1” position, only
the grip handle mounted fire button is operational.
To Next Page
Loading...