WiebeTechbeTech Drive eRazer User Manual

D r i ve eRa z e r ™ U s e r Ma n u a l ( A9 - 0 0 0 -0 0 0 8 R E V 1 . 0 ) - 1 -
Drive eRazer™
USER MANUAL
(Revised April 8, 2011)
Features
• Stand-alone product for erasing hard drives—no computer required.
• Status LED shows how much time remains in the erasing process
• Durable aluminum case with excellent heat dissipation
• Small size allows you to take it anywhere
• The models for 3.5” drives can optionally be used with WiebeTech’s v4 Combo Adapters,
adding compatibility with many more drive types. Versatile Bundle configurations include two
such adapters for the most common drives, including 2.5” & 3.5” SATA.
Table of Contents
1. Pre-Installation Instructions 2
2. Installation Steps 4
3. Using Drive Adapters 5
4. Mode Specifications 6
5. Switching Between Modes 7
6. Frequently Asked Questions 8
7. Technical Specifications 9

WiebeTechbeTech Drive eRazer Specifications

General

Brand	WiebeTechbeTech
Model	Drive eRazer
Category	Computer Accessories
Language	English

Summary

Pre-Installation Instructions

Accessories Check

Verify all packaged accessories are present and undamaged.

Device Familiarization

Identify and understand the various components of the Drive eRazer.

Status LED Functions

Explains the different functions of the Drive eRazer's status LED for operation and errors.

Installation Steps

Configure Drive Jumpers

Set IDE/PATA drives to the Master setting before connecting.

Attach Drive Plate

Optionally attach the metal drive plate for drive protection and heat dissipation.

Connect Hard Drive

Connect the IDE ribbon cable and 4-pin power connector to the hard drive.

Connect Power to eRazer

Activate the unit and observe power output LEDs and access indicator.

Using Drive Adapters

SATA Drive Adapter

Instructions for connecting 2.5-inch or 3.5-inch SATA drives via adapter.

2.5-inch PATA Drive Adapter

Instructions for connecting 2.5-inch PATA drives, common in laptops.

Mode Specifications

Primary Mode: Single-Pass

Erases drive in one pass, overwriting bits with zeroes and verifying.

Secondary Mode: Multi-Pass

Overwrites drive three times with different patterns for enhanced security.

Secondary Mode: Secure Erase

Utilizes built-in drive firmware command for secure, federally approved erasure.

Switching Between Modes

Jumper Configuration

Change the operation mode by repositioning a jumper on the circuit board.

Frequently Asked Questions

Secure Erase Functionality

Explains Secure Erase as a NIST 800-88 approved ATA command for data overwriting.

Secure Erase Time Support

Addresses drives that support Secure Erase but may not report time codes.

Erase Speed Factors

Details variables affecting erasure speed, including mode, drive size, and age.

Government Validation

Confirms NIST validation and mentions DoD reports for product testing.

Data Classification Erasure

Clarifies DoD requirements for classified vs. non-classified data erasure.

Drive Capacity Compatibility

Specifies compatible drive capacities, from 5.12MB to 2TB.

IDE/PATA Drive Jumper Settings

Recommends MASTER jumper setting for IDE/PATA drives, with alternatives.

Technical Specifications

Product Models and Erase Modes

Lists available Drive eRazer models and their supported erasure modes.

Erasure Speed and Detection

Details erasure speed, HPA/DCO detection capabilities.

Power and Connectivity

Specifies power supply requirements, input, output, and switch functions.

Operating Environment

Defines operating temperature and humidity ranges for the device.

Drive Compatibility and Dimensions

Lists compatible drive types and physical dimensions of the eRazer unit.

Warranty and Support

Outlines the product warranty, phone support, and email support contacts.