3
english
IInnttrroodduuccttiioonn
TThhaannkk yyoouu
for purchasing an AGC
®
unit from WIELAND EDELMETALLE. This equipment will give you the
best possible results and ensures that you receive the quality of the original dental electrofor-
ming process as well as the excellent service and support offered by the leading supplier in
dental electroforming.
Take a little time to read these instructions carefully before you first use the equipment. This
will help to avoid incorrect operation, which could lead to unsatisfactory results.
Should you have any questions after studying these instructions, please contact your distribu-
tor or directly:
Wieland Edelmetalle GmbH & Co.
Schwenninger Str. 13, D-75179 Pforzheim
Germany
Tel.: + 49 7231 3705 0
Fax: + 49 7231 357 959
Internet: http://www. wieland-dental.de
e-Mail: Wieland@wieland-dental.de
AGC
®
hotline (in Germany only): 0800 / 822 822 2
The AGC
®
process has been in use in dental prosthetics since 1986. Today it counts as one of
the most successful and future-oriented technologies for the production of high-quality dental
restorations. Since the start of its development, this process has been constantly monitored by
leading universities. Numerous independent publications have testified to the excellent clinical
prognosis of restorations made with this process. WIELAND EDELMETALLE was the first manu-
facturer in the world to enable the production of electroformed frameworks for porcelain or
acrylic veneered dentures in the laboratory. In the last years the technology of these devices
has been developed further, so that today a family of units is available to ensure optimum
results for all requirements. The operation of the units and the co-ordination of all components
involved in the production of an AGC
®
crown have been perfected to such a degree that the
quality of results obtained and the range of indications covered are virtually impossible to
achieve with any other technology. Since research, development and most importantly of all,
the production of the units and the electrolyte are all carried out in-house, it is certain that the
system will continue to develop to meet future market demands. Your decision to purchase
this AGC
®
unit from WIELAND EDELMETALLE ensures that you will benefit from the proven
efficiency of the most experienced supplier in the area of dental electroforming and from the
scientifically proven excellent clinical results of AGC
®
technology.
To Next Page
Loading...