WiFi CONNEkT Starter Kit - Page 48

48
• You will be asked if
you wish to change
the IP Address of the
WiFi CONNEkT Wall
Socket, however this
is a more advanced
setting and won’t be
shown in this set-up
guide. However, if
you do choose
to change the
IP Address please
ensure that your
chosen IP Address
is not in use.
• Ensure the ‘Change
Default IP’ box is
unticked and click
OK to continue.
• The loading screen
will appear (NOTE:
this screen will
freeze).
Starter Kit - Install guide PRINT - 2018_Layout 1 09/01/2018 09:41 Page 52