wiking Miro 4 User Manual (English)

Other manuals for wiking Miro 4

Installation And User Manual24 pages

Assembly Instructions24 pages

Questions and Answers:

J
Julie Miller MDJul 27, 2025
Why is the glass pane on my Wiking Wood stove covered in soot?
- A
  annecastilloJul 27, 2025
  Soot on the glass pane of your Wiking Wood stove can be due to several reasons. The wood may be too moist; ensure you're using firewood that has dried for at least 12 months and has a water content of 12-18%. A loose door seal can also cause this; check if the seals are soft and flexible, and replace them if needed. An insufficient supply of secondary air to the pane-flushing system may be the cause; try moving the air control lever further to the left. Finally, the temperature inside the stove might be too low; add more wood and adjust the regulating lever to the left.
J
Joshua DickersonJul 31, 2025
What to do if smoke enters the room when I open my Wiking Wood stove?
- R
  Richard VillanuevaJul 31, 2025
  If smoke enters the room when you open your Wiking Wood stove, there could be a few reasons. First, check if the damper in the chimney is closed and open it. Poor chimney draft can also cause this; make sure the smoke pipe or chimney isn't blocked and that the chimney height is correct. Also, never open the door if the firewood is in flames.
T
Terry GarciaAug 4, 2025
Why I cannot make a sufficient fire in my Wiking Wood stove?
- J
  jonesmorganAug 5, 2025
  If you're having trouble making a sufficient fire in your Wiking Wood stove, it could be due to incorrect lighting. Also, check for poor chimney draft. Ensure that the smoke pipe or chimney is not blocked and that the chimney height is correct in relation to its surroundings.
K
Kathy SanchezAug 8, 2025
Why are the fire-proof materials in the combustion chamber of my Wiking Wood stove blackened after firing?
- K
  Kimberly CannonAug 9, 2025
  Blackened fire-proof materials in your Wiking Wood stove's combustion chamber could indicate that you haven't fired enough, meaning there's not enough air or firewood. Try moving the air control lever further to the left and igniting a larger quantity of wood. Another cause may be a loose seal in the door or ash drawer; ensure the seals are soft and flexible, and replace them if necessary. Excess chimney draft can also lead to this; close the damper in the chimney a bit at a time until the problem is solved, and simultaneously move the air control lever further to the right.
N
nathanedwardsAug 13, 2025
What to do if the door of my Wiking Wood stove is not completely sealed?
- C
  Colin TaylorAug 13, 2025
  Close the door completely. If it cannot close completely, it must be replaced with an original spare part.
A
Amy MillerAug 18, 2025
Why does smoke enter the room when I open the Wiking Wood stove door?
- M
  Mrs. Amy JohnsonAug 18, 2025
  If smoke enters the room when you open the door of your Wiking Wood stove, it might be due to a closed damper in the chimney. Make sure to open the damper. Another cause might be poor chimney draft, so ensure that the smoke pipe or chimney is not blocked and that the chimney height is correct in relation to its surroundings. Never open the door if the firewood is in flames.