Wilfa E-way E-600 - E-600 Error Codes and Solutions

4.6 Error Description
Some of the errors can be xed by the user. if you are
uncertain how to x, please contact the service center.
Display Defect Description Solutions
E0 Wrong in
communication
1. Check whether the display control board
is well connected.
2. Replace the display.
3. Replace the control board.
E1 Encountered
obstacles which
E-scooter can’t get
over
1. Release the accelerator and stop braking.
2. Restart.
3. Replace the brake lever.
4. Replace the accelerator.
E3 Hall is abnormal
1. Check whether the Hall wire plug of the
motor is loose.
2. Check whether the motor cable is
damaged.
3. Replace the motor.
4. Replace the control board.
E4 Brake system
malfunction
1. Release the brake.
2. Restart.
3. Replace the brake lever.
E5 Throttle fault 1. Release the accelerator.
2. Restart.
3. Replace the accelerator.
15