EasyManua.ls Logo

Wilfa MC3B-400S - Page 48

Wilfa MC3B-400S
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
8
USE
Before first use, clean the various parts of the appliance.
Notes: For liquids, never exceed 1.2L.
Chopping and blending
Put the blade onto the fixed shaft in the bowl. Pour in the ingredients and
lock the lid. Please note that it is possible to use the blades separately if
you prefer this – but using all 3 at the same time give the best result, of
course.
Place the motor unit onto the assembly by turning it slightly.
Plug in the appliance and press the start button, at the same time holding
the appliance on the motor unit.
At the end of the preparation, release the button, unplug the appliance and
wait until the blades have come to a complete stop.
Remove the motor unit, the lid and the blades to pour out the prepared
food.
To mix or blend cooked food:
Chop the food into small pieces, add some broth (meat or vegetables) and mix
the ingredients with pulses. To blend the mixed food, press the start button
continuously until you reach the desired result.
For fruit preserves:
Chop the fruits into small pieces, add some milk, water or juice and mix the
ingredients with pulses. To blend the fruits, press the start button continuously
until you reach the desired result.
Larger Quantities
If you want to blend or cut bigger quantities, cut into small pieces, close the lid,
and press the button.
Caution: Do not operate the unit when empty.
Caution: Maximum time of processing should not exceed 10 seconds
continuous use. In order to achieve above processing times, use the appliance
with pulses and intermediate 10 seconds pauses.
Caution: Do not put hot ingredients into the bowl. Before food preparation,
allow food to cool down for a few minutes.

Related product manuals