EasyManua.ls Logo

Wilfa Narvik 25 - Page 22

Wilfa Narvik 25
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
EN
INSTRUCTION MANUAL · AIR CONDITIONER
u QUIET button
Press this button, the Quiet status is under the Auto Quiet mode (display “
and “Auto” signal) and Quiet mode (display “ “ singal) and Quiet OFF (there
is no signal of “ “ displayed), after powered on, the Quiet OFF is defaulted.
Under the Quiet mode (Display “ “ signal). The Quiet function is only available
for some models.
i SLEEP button
Press this button, can select Sleep 1 ( ), Sleep 2 ( ), Sleep 3 ( ) and cancel
the Sleep, circulate between these, after electried, Sleep Cancel is defaulted.
Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status after run for
one hour, the main unit setting temperature will increase 1°C, 2 hours, setting
temperature increased 2°C, the unit will run at this setting temperature; In Heat
mode: sleep status after run for one hour, the setting temperature will decrease
1°C, 2 hours, setting temperature will decrease 2°C, then the unit will run at this
setting temperature.
Sleep 2 is sleep mode 2, that is air conditioner will run according to the
presetting a group of sleep temperature curve. In Cool mode:
1. When setting the initial temperature 16°C-23°C, after turned on Sleep
function, the temperature will be increased 1°C in every hour, after 3°C
the temperature will be maintained, after 7hours, the temperature will be
decreased 1°C, after that the unit will keep on running under this temperature;
2. When setting the initial temperature 24°C-27°C, after turned on Sleep
function, the temperature will be increased 1°C in every hour, after 2°C
the temperature will be maintained, after 7hours, the temperature will be
decreased 1°C, after that the unit will keep on running under this temperature;
3. When setting the initial temperature 28°C-29°C, after turned on Sleep
function, the temperature will be increased 1°C in every hour, after 1°C
the temperature will be maintained, after 7hours, the temperature will be
decreased 1°C, after that the unit will keep on running under this temperature;
4. When setting the initial temperature 30°C, under this temperature setting,
after 7hours, the temperature will be decreased 1°C, after that the unit will
keep on running under this temperature;
In Heat mode:
1. Under the initial presetting temperature 16°C, it will run under this setting
temperature all along.
2. Under the initial presetting temperature17°C-20°C, after Sleep function
started up, the temperature will decrease 1°C in every hour, after 1°C
decreased, this temperature will be maintained.
3. Under the initial presetting temperature 21°C-27°C, after Sleep function
started up, the temperature will decrease 1°C in every hour, after 2°C
decreased, this temperature will be maintained.

Other manuals for Wilfa Narvik 25

Related product manuals