Wilier Cento1 Hybrid Quick Start For First Time Use

1
!
!
!
QUICK START FOR FIRST TIME USE
HOW TO USE THE BIKE
The Cento1 Hybrid can be used both as a normal road bike and with assisted pedalling active. Assisted pedalling can
be activated / selected using the iWOC button located on the top tube near the handlebar. For a more interactive
experience with the Cento1 Hybrid, we recommend downloading and using the eBikeMotion App.
Before use, carefully read the Wilier Triestina User Manual and the eBikeMotion Quick Guides, which you were given
along with the Cento1 Hybrid.
FIRST STEPS FOR USING YOUR CENTO1 HYBRID
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Check that the battery on your Cento1 Hybrid is sufficiently charged before use.
To charge the battery:
1. Connect the charger you were given when you received the bike to a power
outlet.
2. Connect the charger to the charging socket on your Cento1 Hybrid (B).
Be careful to insert the plug correctly: the arrows present on both parts
(plug and socket) must line up; once the cable has been connected to the
charging socket, we recommend stabilising the connection by tightening
the safety ring.
!
A: iWOC button
B: Charging socket
C: X35 Motor

Wilier Cento1 Hybrid Specifications

General

Frame Material	Carbon Monocoque 46TON
Motor	MAHLE Ebikemotion X35+
Battery	MAHLE Ebikemotion 250Wh
Fork	Carbon Monocoque 46TON
Brakes	Shimano Ultegra R8070 Hydraulic Disc
Tires	Vittoria Zaffiro Pro 700x28
Crankset	Shimano Ultegra R8000 50/34T
Rear Derailleur	Shimano Ultegra R8000
Shifters	Shimano Ultegra R8020
Chain	Shimano CN-HG701