Quick start guide
The following steps describe the quickest method to get your pressure washer
up and running. However, it is essential you fully read this manual to ensure you
are familiar with the general safety features, precautions and functions necessary
to operate the product. Failure to do so may result in injury and damage to your
washer or personal items.
No. Part No. Part
1. Pressure Washer 6. Water Outlet
2. Water Hose (Not included) 7. Gun
3. Water Connection 8. Power Outlet
4. Water Inlet 9. Power Switch
5. High Pressure Hose 10. Link Hose
9
10
ASSEMBLY
1. Attach the link hose to the hose reel and water outlet.
2. Connect the high pressure hose to the gun.
3. Attach the water hose to the water inlet (supply this washer with cold water only).
4. Connect one of the 5 coloured nozzles to the end of the gun.
5. Plug the washer into a power outlet.
6. Turn on water supply and hold the trigger on the gun until a constant stream of water flows.
7. Turn on the power to the unit.
8. Press the trigger on the gun to begin washing.
En
To Next Page
Loading...
