Will Burt Night Scan Chief Series User Manual

Night Scan Chief
Operating Instructions
The Will-Burt Company
401 Collins Blvd
Orrville, OH 44667, USA
Phone: +1 330 682 7015
E-Mail: contact_us@willburt.com
Website: www.willburt.com
TP-4602001-T, December 2020
© 2020 The Will-Burt Company
Original Instructions
Authorized Representative:
GEROH GmbH & Co. KG
Fischergasse 25
D-91344 Waischenfeld, Germany

Will Burt Night Scan Chief Series Specifications

General

Light Head Type	LED
Light Source	LED
Mobility	Trailer-mounted
Beam Angle	Varies by model
Color Temperature	5000K
CRI	70
Power Supply	Varies by model
Dimensions	Varies by model
Cooling System	Passive
Control	Remote

Summary

Warranty Information

Safety Summary

Signal Word Definitions

Defines hazard signal words like DANGER, WARNING, and CAUTION for safety alerts.

General Safety Instructions

Covers critical safety precautions for operation, maintenance, and general handling of the system.

Product Label Symbols

Explains symbols used on product labels for hazard identification and warnings.

Specification Compliance

NFPA 1901-2016 Compliance

Details compliance with specific sections of the NFPA 1901-2016 standard for light masts.

CE Declaration of Conformity

Provides the EU Declaration of Conformity for the product, listing applied directives and standards.

Introduction to Night Scan Chief

Manual Overview and Intended Audience

Overview of manual content, intended for qualified professionals, and notes on system variations.

Intended Use and Operational Context

Details the intended professional applications and operational constraints, emphasizing vehicle stationary use.

Mast Position Definitions

Defines the stowed, 90°, and extended positions of the mast for operational clarity.

Night Scan Chief Component Descriptions

Describes major components of the Night Scan Chief system, including mast, RCP, and base board.

Remote Control Options

Details the available options for controlling the mast functions: HHRC, PMRC, and WHHRC.

Technical Data and Specifications

Installation Procedures

Mounting Location Requirements

Factors to consider when selecting an appropriate and safe mounting location for the system.

Installation Tools and Handling

Lists recommended tools and procedures for unpacking and handling the system during installation.

Attaching to Mounting Location

Steps for physically attaching the mast base and saddle to the vehicle mounting structure.

Wired Hand-Held Remote Installation

Steps for installing the HHRC, including bulkhead connection and mounting.

Panel Mount Remote Control Installation

Instructions for cutting the panel, mounting, and securing the PMRC unit.

Electrical Installation Guide

Guidance on connecting power, control cables, and ensuring proper wiring for operation.

Installation Testing Procedure

Steps to verify the correct installation and functionality of the system after setup.

System Operation Guide

Pre-Operation Check

Ensures the system is safe and ready for operation by checking for obstructions and damage.

Remote Control Functions Overview

Identifies buttons and basic functions available on the remote controls for system operation.

Quick Operation Summary

A brief overview of the system's operation sequence, including E-Stop and power-up.

System Power-Up Procedure

Steps to power up the system, including resetting the E-Stop and initiating the start button.

Raising the Mast to 90 Degrees

Procedures for raising the mast to the 90° position, enabling RCP and light functions.

Extending the Mast

Procedure for extending the mast to its full or partial height after reaching 90°.

Controlling Lights and Mast Movement

How to operate lights, pan, tilt, lower, and stow the mast using the remote control.

Stowing the Mast

Methods for stowing the mast safely into its nested position for transport.

Emergency Stow Procedures

Covers emergency stowing with and without power to ensure safe mast retraction.

Maintenance, Adjustments, and Disposal

Power Isolating and Safety Procedures

Steps to safely isolate power before maintenance and general safety precautions.

Cleaning, Lubrication, and Inspections

Routine maintenance for cleaning, lubricating, and periodic inspection of the system.

Limit Switch and RCP Adjustments

Procedures for adjusting limit switches and RCP home position for optimal performance.

System Disposal Guidelines

Instructions for the proper disposal of the mast system in accordance with environmental regulations.

Reference Information

DIP Switch Definitions

Explanation of DIP switch settings on the Base Board and RCP for system configuration.

Optional Features: Strobe and Nycoil

Information on optional strobe/beacon lights and Nycoil conduit for enhanced functionality.

Bulb Replacement Procedures

Guides for replacing bulbs in non-LED lampheads, specific to different fixture types.

Troubleshooting Guide

Troubleshooting Electrical Issues

Lists error codes, potential root causes, and solutions for electrical problems detected by the system.

Troubleshooting Mechanical Symptoms

Identifies common mechanical problems and their troubleshooting sequences that may not generate error codes.

Document Revision History

Chronological log of changes and updates made to the operating instructions document.

Appendix and System Diagrams

Auxiliary Air Supply Model Details

Information specific to models using an external air supply, including requirements and connections.

System Wiring Diagrams

Provides the system wiring diagrams for installation and troubleshooting purposes.