Need help?Do you have a question about the Wills Wing Sport 2 155 and is the answer not in the manual?
General| Brand | Wills Wing |
|---|---|
| Model | Sport 2 155 |
| Category | Aircrafts |
| Language | English |
Detailed steps for reassembling the Sport 2 glider after it has been disassembled for shipping.
Step-by-step instructions for safely removing the rear leading edges of the glider for transport.
Comprehensive checklist for inspecting all glider components before flight to ensure airworthiness and safety.
Explains critical airspeeds (MCA and MSA) for safe and efficient flight, and how to identify them.
Guide on using sail tufts to determine the glider's minimum sink speed for optimal performance.
Discusses the use and safety considerations of drag devices like drogue chutes for landing approaches.
Covers adjustment and testing of sprog and bridle systems for optimal pitch stability and flight characteristics.
Instructions for measuring sprog and bridle components to ensure correct factory settings and symmetry.
Step-by-step guide for adjusting the sprog height and bridle components for optimal glider performance.
Guidance on conducting test flights to verify sprog and bridle adjustments and overall pitch stability.
Recommended maintenance tasks to be performed every six months to ensure glider airworthiness and longevity.
Annual maintenance procedures, including disassembly and thorough inspection of all glider components.
Maintenance recommendations for specific events like crashes or exposure to saltwater.
Detailed instructions for safely removing the glider sail from the airframe for repairs or cleaning.
Step-by-step guide for correctly reinstalling the glider sail onto the airframe after removal.
Information on adjusting the center of gravity for optimal glider balance and handling characteristics.
Guidance on diagnosing and correcting glider turns caused by asymmetry or improper adjustments.
Checks for structural integrity, including bent tubes and keel alignment, for safe flight.
Instructions for checking and ensuring the symmetrical shape of the glider's battens.
How to align tip wand receptacles for proper sail tension and wingtip performance.
Method for checking and adjusting sail tension on the leading edges for optimal aerodynamics.
Corrective procedures for glider turns by adjusting tip wand receptacle end caps.
How to properly tension battens using lever tips for optimal sail shape and performance.
Specifications detailing the HGMA compliance verification for the Sport 2 155 glider model.
To Next Page