Wilson Benesch Torus - TORUS AMPLIFIER CONTROLS AND THEIR FUNCTIONS

21
TORUS AMPLIFIER CONTROLS
AND THEIR FUNCTIONS
4 5 6 7 8
1) High Level Input Gain Adjust.
2) High Level Input Frequency Contour to allow integration at the crossover point between the
Torus Infrasonic Generator and main loudspeakers.
3) Low Level Input Gain Adjust.
4) Low Level Input Frequency Contour to allow integration at the crossover point between the
Torus Infrasonic Generator and main loudspeakers.
In the L.F.E. Position the filter is opened wide to allow the optimum performance from
processor built in bass filtering.
5) Continuously Variable Phase Control to adjust the phase of the signal sent to the Torus
Infrasonic Generator.
6) Power Switch for the Torus Amplifier.
7) High Level Crossover Frequency Read-out.
8) Torus Amplifier Output Level Indicator.
9) Low Level Crossover Frequency Read-out.
6
7
9
8
1
2
3
4
5