23
TORUS AMPLIFIER PARAMETRIC EQ. SWITCHING
In addition to the controls detailed above the Torus Amplifier is equipped with a Parametric Equalizer that allows
the output signal to the Torus Infrasonic Generator to be rolled off below one of four preset frequencies. On the
underside of The Torus Amplifier is a set of duel inline switches that will allow you to select which setting you
require for the Torus Amplifier’s Parametric Equalizer, including a setting for bypassing this function altogether.
On
Off
On
Off
On
Off
On
Off
On
Off
dB
50
40
30
20
10
0
-10
dB
50
40
30
20
10
0
-10
dB
50
40
30
20
10
0
-10
Input sel.1 Line ±20.00 V
D A A S FREQUENCY RESPONSE
For bypass, switch 4 must be set to the OFF position
and Switch 5 to the ON position. When in bypass
mode switches 1,2,3,6,7 and 8 have no effect.
dB
50
40
30
20
10
0
-10
dB
50
40
30
20
10
0
-10
Input sel.1 Line ±20.00 V
D A A S FREQUENCY RESPONSE
Input sel.1 Line ±20.00 V
D A A S FREQUENCY RESPONSE
Input sel.1 Line ±20.00 V
D A A S FREQUENCY RESPONSE
Input sel.1 Line ±20.00 V
D A A S FREQUENCY RESPONSE
dB
50
40
30
20
10
0
-10
dB
50
40
30
20
10
0
-10
dB
50
40
30
20
10
0
-10
Input sel.1 Line ±20.00 V
D A A S FREQUENCY RESPONSE