26
SAFETY INSTRUCTIONS FOR
THE TORUS INFRASONIC GENERATOR
1) Please read these instructions carefully and keep them for future reference.
2) Please heed all warnings.
3) It is strongly advised that the Torus system is installed, by a suitably trained
person, to avoid causing damage or injury resulting from an incorrect
installation.
4) Do not use this apparatus near water or allow it to get wet.
5) The Torus creates a stray static magnetic field. Do not place any object that
may be damaged by this magnetic field (e.g. cathode ray tube televisions or
computer monitors, audio and video tapes and swipe cards) within 0.5m
(2 feet) of the appliance. The appliance may cause distortion of cathode ray
tube images beyond this distance.
6) Do not place Torus Infrasonic Generator on a stand or table; it may fall
causing injury to a child or adult, and damage to the unit. The spikes are
very sharp on the base and should always be mated to the floor surface.
7) Refer all servicing to qualified service personnel. If the unit develops a fault
of any sort please refer repair back to your dealer.
8) The Torus Infrasonic Generator is very heavy (34 kilograms). To avoid risk
of injury, please take care when handling.
9) Whenever connecting the Torus Amplifier to the Torus Infrasonic Generator,
ensure that the amplifier is turned off.
10) Do not over-tighten the terminals on the Torus Infrasonic Generator as this
will lead to damage of the polymer terminal mount.
UNPACKING
Caution: The Torus and it’s packaging are very heavy (36KG)
please take care when lifting
The easiest way to unpack the Torus Infrasonic Generator to avoid damage is as follows:
• Open the carton flaps right back and invert the carton and contents.
• Lift the carton away from the product.
• We recommend that you retain the packaging for future use.
In addition to this manual, the carton should contain:
1 Infrasonic Generator
1 Terminal Spanner
1 Pair of terminal link leads
To Next Page
Loading...