© by WilTec Wildanger Technik GmbH Item 34201 Page 4
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
cable away from heat, oil, or sharp edges. Protect it from breaking. Do not pull out the plug by
pulling the power cable.
• If the compressor is used outdoors, only approved extensions may be used. Every wire of the
extension cable must have at least a 1,5 mm² cross-section.
• Store the compressor in a well-ventilated place. Do not allow children or any other people not
able to handle this device to play or work with it.
• Be very careful when working with the compressor. Do not perform work with this product when
being unalert or influenced by alcohol, drugs, or medicine.
• When beginning work, make sure that all screws are tightened.
• Do not use the compressor if it is damaged. If the compressor makes unusual noises and strong
vibrations or if other unusual signs occur that indicate some damage, immediately turn off the
compressor. Do not modify the compressor in any way. Only have repairs made by qualified
persons and using original spare parts.
Properties
• Compressor with casing, airbrush gun holder, modern design, and optimal functionality
• Air tank with regular pulsation-free air flow
• Air intake and outlet filter
• Oil free, piston compressor, no polluted air
• With water filter, pression adjustment, and manometer
• Overheating protection
• Safety device for air tank
• Very low noise level
Use
The AS176 airbrush compressor is for example suitable for operating in the following areas: arts and
crafts, hobbies, modelling, tattoos and body art, make-up and nail design, as a source of air in the field
of medicine, in food industry, chemical industry, laboratories, etc.
To Next Page
Loading...
Need help?
General
