EasyManua.ls Logo

Wincor Nixdorf M1 User Manual

Wincor Nixdorf M1
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
M1 and M2 POS Motherboard
(with BIOS Setup)
User Manual (Edition May 2017)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Wincor Nixdorf M1 and is the answer not in the manual?

Wincor Nixdorf M1 Specifications

General IconGeneral
BrandWincor Nixdorf
ModelM1
CategoryMotherboard
LanguageEnglish

Summary

Overview

Some Highlights of the M1 and M2 Motherboard

Lists key features like Intel Core processors, chipset, graphics, LAN, SATA, RAM, PCIe.

Motherboard Specification

Mainboard Assembly Variants

Details M1 (Q170) and M2 (H110) motherboard variants and their differences.

Block Diagram

CPU Support

Mainboard Internal Connectors

Memory (Internal)

Describes two DDR4 SODIMM sockets for up to 32GB RAM.

Mini PCI Express /mSATA (Internal)

M.2 (Internal)

TPM (Internal)

PCI Express Slots (Internal)

ATX / 12V Power Connector (Internal)

XHCI USB Controller

Processor Graphics

System Wake Up

Mainboard Onboard Connectors (External)

Power Supply Requirements

Power Load Ability

Frequency and Bandwidth Overview

RAID (M1 Motherboard)

Technical Data

Processor

Lists supported Intel Core processors (6th/7th Gen).

Graphics

Lists supported Intel HD graphics based on CPU type.

Main Memory

Describes dual-channel DDR4 SODIMM support up to 32GB.

Changing the Battery

UEFI BIOS Setup

Standard UEFI BIOS Version

Explains how to access the BIOS Setup utility (F2 key).

BIOS Menu Bar

Info Screen

Main Menu

Advanced Menu

Onboard Devices Configuration

Submenu to configure system board devices.

CPU Configuration

Active Processor Cores

Allows limiting the number of active processor cores.

Intel Virtualization Technology [Enabled]

Supports visualization of hardware and software environments.

VT-d [Enabled]

Drive Configuration

SATA Mode

CSM Configuration

Trusted Computing

TPM Support [Disabled]

Enables or disables TPM support.

USB Configuration

Legacy USB Support [Enabled]

Specifies whether legacy USB support is available for booting.

Hardware Monitor

Super IO Configuration

AMT Configuration

Intel AMT [Enabled]

Enables/Disables Intel Active Management Technology BIOS Extension.

Network Stack Configuration

Network Stack [Enabled]

Enables/Disables UEFI Network Stack.

Graphics Configuration

Primary IGFX Display

Selects the video output device activated during POST.

ACPI Settings

OEM Settings

Intel Ethernet Connection

Security

Administrator Password

Allows setting an administrator password for full BIOS access.

Administrator Password

System Firmware Update [Enabled]

Secure Boot Configuration

Secure Boot Control [Enabled]

Enables Secure Boot if system is in User mode and CSM is disabled.

Secure Boot Mode [Standard]

Selects Secure Boot mode (Standard or Custom).

Power

Restore AC Power Loss [Switch off]

Defines system behavior after power failure.

Wake-Up Resources

Power Control

Event Logs

Boot

Boot Mode Select [LEGACY]

Save & Exit

Restore Defaults

Test Points Codes

DXE Error Codes

Related product manuals