To Next PageTo Next Page
Need help?Do you have a question about the Windex LXA Series and is the answer not in the manual?
Overview of available LXA unit configurations and variants.
Details on frame, compressors, fans, condenser, evaporator, and electrical board.
Description of the refrigerant and water circuit components and functionality.
Explanation of the AQUALOGIK system for optimized water set point and pump modulation.
Diagram illustrating the standard water circuit configuration.
Graph and data for pressure drops in the hydraulic circuit.
Specifies the minimum and maximum water flow rates for the evaporator.
Factors to adjust performance when operating with glycol-water solutions.
Correction coefficients for evaporator fouling, affecting performance.
Diagram and component list for the refrigeration circuit of cooling-only units.
Diagram and component list for the refrigeration circuit of heat pump units.
Description of hydraulic circuits for standard units.
Details on circuits with inertial tank, circulation pump, or double pump.
Hydraulic circuit for AQUALOGIK units with INVERTER pump.
Diagram for the hydraulic circuit of units with AQUALOGIK technology.
Technical specifications for units with storage tanks, pumps, and Aqualogik.
Information on operating weight, weight calculation, and hydraulic connections for accessories.
Graphs showing characteristic pump performance for units with storage tanks.
Graphs showing characteristic pump performance for units with AQUALOGIK technology.
Details on unit control functions, alarms, and operator interface.
Wiring diagram for LXA 182-P and 302-P models, including power and control.
Wiring diagram for LXA/H 182-P and 302-P heat pump models.
Wiring diagram for LXA 363-P and 453-P models, including power and control.
Wiring diagram for LXA/H 363-P and 453-P heat pump models.
Wiring diagram for LXA 524-P and 604-P models, including power and control.
Wiring diagram for LXA/H 524-P and 604-P heat pump models.
Guidelines for unit placement, ensuring clearance and environmental compatibility.
Instructions for making electrical connections, including safety precautions.
Recommendations for correctly installing the hydraulic system and components.
Guidance on initial start-up and routine maintenance procedures.
General