Need help?Do you have a question about the Windsor Sensor XP 12 and is the answer not in the manual?
General| Brand | Windsor |
|---|---|
| Model | Sensor XP 12 |
| Category | Floor Machine |
| Language | English |
Most common vacuums using a fan to create suction; often have beater bars and low filtration.
Clean air systems with a single motor for vacuum and brush, often with IAQ features and 99.6% filtration.
Durable, high-usage machines with separate motors for vacuum and brush, offering durability and longevity.
Vacuums with a 20" or higher cleaning path for large open areas, often using dual motors for high productivity.
Machines that sweep debris into a hopper, often battery-powered, increasing productivity by eliminating cords.
Canister vacuums worn by the operator, suitable for quick vacuuming needs and applications requiring mobility.
Versatile vacuums for both wet and dry pickup, essential for most facilities and commonly commodity products.
Lightweight extractors designed for quick spot removal from carpets before spills become stains.
High psi, powerful vacuums for contract cleaners, offering portability and large solution/recovery capacity.
Machines that apply, scrub, and recover solution in one pass, using brush agitation for cleaning effectiveness.
Riding extractor with small footprint and tight turning radius for deep or interim cleaning, offering high recovery.
Basic floor machines rotating ~175 rpm for scrubbing, stripping, polishing, and pre-spray agitation.
Floor machines with two speeds (~175 and 300 rpm) for versatile use in buffing, stripping, and polishing.
High-speed machines (1000-2500 rpm) for shine enhancement and scratch repair on floor finishes.
Stand-on burnisher, twice as productive as walk-behinds, with passive dust control and long run time.
Machines that apply, scrub, and recover solution in one pass, cutting labor time and increasing productivity.
Compact auto-scrubbers for smaller areas (<5000 sq ft), offering easy operation and simple cleaning.
Auto-scrubbers (16-22") for small to congested facilities, easily transportable and efficient.
Larger auto-scrubbers (24-36") for big facilities (30k-60k sq ft), improving productivity and operator efficiency.
Rider scrubbers (26-36") for large facilities, offering increased productivity, reduced fatigue, and better visibility.
Stand-on scrubber with small footprint and tight turning radius for busy layouts, improving productivity.
Push sweepers powered by wheels, lightweight, with no dust control, for rough surfaces like concrete or carpet.
Battery-powered sweepers (24-36") for large areas, entrance cleaning, and warehouses, utilizing hoppers for debris.
Larger sweepers (36-66") for warehouses, factories, and large carpeted areas, offering high productivity.
iCapsol system uses encapsulation technology for cleaning and soil removal, extending time between restorative extractions.
Versatile machines for restrooms, kitchens, or general cleaning with on-board chemical dilution and dirty water recovery.
Wet cleaning machines specifically designed for escalators and moving walkways with short shut-down times.
To Next Page