When unit is completely charged , four panels will become solid blue. It will take about 10 hours to fully charge the battery.
2. Opening a Wine Bottle with the Wine Opener
Before extracting the cork please remove any seal from the bottle using the Foil Cutter provided (see Fig.2)
Place the Wine Opener on top of the wine bottle making sure that it remains as upright as possible at all times. If you hold the Wine Opener at an
angle to the bottle it will not remove the cork properly. (see Fig.3)
Hold the Wine Opener with one hand and the wine bottle firmly with the other hand. Simply place the corkscrew on top of the bottle in line with the
cork. The corkscrew spiral will then automatically activate and turn in a clockwise direction to enter the cork, and then gradually remove it from the
bottle. When the Wine Opener mechanism stops, the cork will be visible through the transparent window and the blue indicator will go off.
Note: Dont try to remove the Opener if cork is not released fully.
Lift the Wine Opener away from the bottle. The cork will then automatically release from the bottle, and the spiral will turn in a counter-clockwise
direction and release the cork. (see Fig.4)
Return the Wine Opener to the Charging Base when not in use, so as to protect the mechanism.
This Wine Opener is designed for use with traditional corks, but it may be used with synthetic corks as well. Synthetic corks are smaller and do
not expand like normal cork so sometimes they may stick on the spiral. If this happens, please insert the provided Reset Tool and into the Reset
To Next Page
Loading...
Need help?
General
