winees F3 - Page 18

5. Use wire nuts to connect the mount bracket wires
to the rest of the wires from junction box.
- Connect the white wire on the mount bracket to
the white wire(neutral) from the junction box.
- Connect the black wire on the mount bracket to the
black wire(hot) from the junction box.
NOTICE:
-Never cross connect
If you are in Europe please follow:
- Connect the blue wire on the mount bracket to the blue wire(neutral)
from junction box.
- Connect the brown wire on the mount bracket to the brown wire(hot)
from junction box.
1. Hold the wires together 2.Twist the wires nut 3-5 times
NOTICE:
-Pull the wire down slightly to make sure the wire nuts secure the cable
EN
31
EN
32