Mounting the Antenna: Mounting Options
The FreeVision antenna is designed to be mounted either of two ways:
Wall Mounting—The FREEVISION has been designed with holes to allow
it to hang on a wall from a nail.
Mast Mounting—The FreeVision antenna comes with a bracket and U-bolt
to allow for mounting to a pipe or mast. For mounting to a pipe or mast,
first insert the (yellow) 1-3/4” screw into the bracket and through the
mounting hole. Attach the bracket to the back of the FreeVision antenna.
Thread a 10-32 hex flange nut onto the screw, and tighten it.
Once the clamp is attached, assemble the U-bolt around the mast or
pipe, and install the nuts securely to keep the antenna in place.
Hole for Nail
Hole for Nail
Mast
U-Bolt
Back Side
of Antenna
3 4
2
1
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
To Next Page
Loading...
