Painting the FreeVision Antenna
The FreeVision antenna can be painted as long as the metal prongs of the
forward elements and the matching transformer forks are not painted. If
you choose to paint the antenna, cover the two circled areas with tape
before painting. If these areas are painted, your antenna will NOT work,
and you will void your warranty.
To prevent paint from easily flaking, use a primer when painting the antenna.
Troubleshooting
Issue Possible Cause
I am not getting channels. Try running a new channel scan
on the TV. Try the antenna in a
new location. Something may be
obstructing the signal.
One channel is missing. Try turning the antenna 10 or 20
degrees in either direction to avoid
reflection or to better optimize the
signal, or try moving the antenna
to a new location.
Try running a new channel scan on
the TV. Refer to the channel scan
insert for more information.
The picture or sound freezes
while I am watching a channel,
or there are boxes in the picture.
This is often caused by a weak
or intermittent signal. Try moving
the antenna to a better location or
aiming it directly at the tower for
this channel.
For help, email help@winegard.com or call 1-800-788-4417
Forward
Elements
Matching
Transformer
5 6
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
To Next Page
Loading...
