Maintenance2124−2/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
6/ 7
5. Removal and fitting of insulation bandage
5.1 Removal
⇒ Lift the cylinder liner in accordance with paragraph 2.
⇒ Remove the water guide jacket referring to paragraph 4.
⇒ Loosen all tension springs 13 with assembly tool 94345E.
⇒ Remove the plate 12 for insulation bandage.
⇒ Remove the insulation bandage 11.
5.2 Fitting
Fitting of the insulation bandage is carried out analogously to the removal but in
reverse sequence. Make sure the insulation bandage overlaps approximately
34 mm.
11
12
11
approx. 34 mm
FUEL SIDE
WCH01020
I
13
11
II
F
II
11Gap approx. 5 mm
I
12
Cylinder Liner: Removal and Fitting
2013
To Next Page
Loading...
