Maintenance6545−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
2/ 3
2. Removal
Remark: Pay attention to General Guidelines for Lifting Tools 0012−1.
⇒ Install trolley 94651C and spur-geared chain block 94650 (WLL 1000 kg) on
the longitudinal I-beam 9.
⇒ Attach electric motor 1 to spur-geared chain block with corresponding ropes.
⇒ Unscrew two screws 7 (Fig. ’A’) facing each other, then screw in two centring
studs 94652 instead.
⇒ Unscrew the remaining screws of motor plate 2.
⇒ Separate the motor plate from the spiral casing with two jacking screws if nec-
essary.
⇒ Extract electric motor with plate and impeller 4 from spiral casing in horizontal
direction.
Attention! When removing take care not to damage the impeller.
B
I
9
10
94650
94651C
1
94652
94652
4
94652
WCH00136
I
94652
94651
2013
Auxiliary Blower: Maintenance
To Next Page
Loading...
