Maintenance6708−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
2/ 3
3. Removal
⇒ Fasten manual ratchets ’H1’ to the corresponding lugs in the receiver, connect
and tighten them with the water separator.
⇒ Remove screws 15 and put both covers 14 with their air flaps 2 fitted (approx.
47 kg each) on the bottom of receiver 1.
⇒ Loosen screws 8 and remove them together with plates 7.
⇒ Loosen and remove spring packs 9.
⇒ Loosen screws 6 on cover 4 to the water separator.
⇒ Carefully lower the water separator.
B
018.188/09
I
I - I
I
III
I
I
9310
8,101
7 3
H1
II
III
II
1
5
4
6
14
15
2013
Maintenance of Water Separator 1-part Water Separator
To Next Page
Loading...
