WinGD WARTSILA RT-flex58T-D - Hydraulic Pipe for Exhaust Valve Drive

Maintenance
8460−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
1/ 3
Tools: Key to Illustrations:
1 Regrinding device 94834 1 Hydraulic pipe 9 Claw
2 Servo oil rail 10 Thrust ring
3 Screw plug 11 O-ring
4 Pre-control valve 12 O-ring
5 Exhaust valve control unit 13 Stop valve
6 Screw
7 Screw DF Sealing face
8, 8a Flange LB Leak oil bore
1. Removal
Stop the motor before beginning any work on the hydraulic pipe. Strictly follow the
instructions 0520−1 ’Exchange of defective exhaust valve control unit or hydraulic
pipe as set out in the Operating Manual.
A
II
7
8a
1
6
8
4
5
2
II
II
015.995/07
2013
Hydraulic Pipe for Exhaust Valve Drive
Removing, Fitting and Regrinding