Winnebago Access Basic Operation Guide

Audio-Video System
Basic Operation
Guide
Part No. 161501-10-002
Rev. 1003090831
Copyright 2009 Winnebago Industries, Inc.
All rights reserved.
NOTE: See your InfoCase for specific
operating guides for audio and
video components.
• Turn on 12-volt master power
switch (located on the underside of
the video cabinet).
NOTE: When TV or DVD
are not in use,
power switch
should be turned
off to avoid drain
on 12-volt house
battery..
Set TV Video Input
• Turn TV and DVD player On.
• Press TV/
VIDEO or
INPUT
button on the
TV remote to
select
“INPUT 1”.
The TV
screen will display the DVD player
logo when the correct input is
selected.
Play DVD
• Insert DVD into player. DVD will
begin to load automatically. TV
screen will typically show
“READING” or “LOADING”.
• The DVD may load directly to the
main title/menu screen or it may
begin to play previews. You may be
able to skip previews if desired by
pressing the “Next Track” button
until you see the main menu screen.
• When the
main menu
screen
appears, use
the arrow
buttons on the
remote to
select the desired entry or press the
ENTER or PLAY buttons on the
remote or DVD player to begin
playing the feature.
• Volume is adjusted using the remote
for either the TV or DVD.

Winnebago Access Specifications

General

Brand	Winnebago
Model	Access
Category	Motorhomes
Language	English