EasyManua.ls Logo

Winny HJ1009 - User Manual

Winny HJ1009
17 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Important Precautions
1. This model mainly applies to swimming pool with flat floor; please refer to instruction of 3)
in 5.3.2 for swimming pool with slope.
2. In order to prevent severe damage to the cleaner, never power on the unit when it is
outside of the swimming pool.
3. The power cord must be connected to leakage protective device and appropriate earthed
socket.
4. Do not operate the cleaner when people are in the pool.
5. Do not try to move the floaters along the electric cable. Leave them always in the original
positions.
6. Before power on, make sure the cable is fully released to avoid any winding, which could
affect the cleaner’s performance or cause damage.
7. The filter bags should be cleaned every time you use the unit. This will prevent the dirty
filter bags affecting the normal operation of the cleaner.
8. The cleaner should be stored in a cool and ventilated place, away from direct sunlight,
when not in use.
9. The power supply unit should be placed in a shaded area. In order to avoid overheating
and the potential damage of components, never cover the power supply unit.
10. Only authorized after sales service personnel should open the cleaner’s motor assembly
and power supply unit, otherwise the warranty will be invalidated.
11. In order to avoid any accident/damage, the power supply unit should be steadily placed
at a minimum distance of 3.5m from the pool edge.
12. Do not use the cleaner beyond the working environment/conditions stated in this manual.
13. Do not uncover the protective film which is sticked on the operating panel.
14. Close the filtering system of your pool when use this cleaner.
Question and Answer IconNeed help?

Do you have a question about the Winny HJ1009 and is the answer not in the manual?

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Usage Features
  4. Maintenance Features
  5. Troubleshooting
  6. Warranty

This document describes the HJ1009 automatic swimming pool floor cleaner, a highly efficient device designed for cleaning swimming pools. It operates autonomously, controlled by a computer program, and is capable of filtering the pool water and removing suspended particles and sediments. The cleaner runs on 24V direct current for safe operation.

Function Description

The HJ1009 cleaner is designed to automatically clean the floor of swimming pools. It uses a computer-controlled program to navigate the pool, filter water, and remove debris. The device features a control panel with buttons and indicator lights for various settings, including pool distance, run time, and movement direction.

Key operational features include:

  • Automatic Cleaning: The cleaner operates automatically once programmed, moving across the pool floor to collect dirt and debris.
  • Nozzle Adjustment: The device allows for adjustment of the nozzle direction to optimize cleaning paths. This can be set for different pool shapes (e.g., square, rectangular, round) and sizes. The nozzle can be set to move at various angles (0°, 15°, 30°, 45°, 60°, 75°, 90°) to ensure comprehensive coverage.
  • Pool Distance Settings: Users can select the pool distance (4M, 6M, 8M, 10M) to match the size of their pool, which helps the cleaner determine its operational range.
  • Run Time Settings: The cleaner offers various run time options (1H, 1.5H, 2H, 2.5H) to suit different cleaning needs.
  • Forward/Backward Movement: A dedicated button allows for manual control of the cleaner's forward and backward movement, useful for specific spot cleaning or maneuvering.
  • Automatic Run: Initiates the automatic cleaning program.
  • Stop Button: Halts the cleaner's operation.
  • Pool Width Indicator Light: Provides an indication related to the pool's width.

The cleaner's movement path can be adjusted based on the pool's shape and size. For example, for a square pool, the nozzle can be set to 45° or 75° to ensure efficient coverage. For rectangular pools, a 30° nozzle setting is recommended. The device also supports setting the pool width (e.g., 6m, 8m, 10m) to optimize the cleaning program.

Important Technical Specifications

  • Rated Input Voltage and Frequency: 220V/50Hz
  • Output Voltage: DC24V
  • Rated Input and Output Power: 150W/120W
  • Working Cycle: 1h/1.5h/2h/2.5h
  • Cable Length: 13m
  • Maximum Cleaning Area: 150m²
  • Filtering Capacity: 15m³/h
  • Filtering Capability: 150µm
  • Water Temperature of Use: 10°C - 35°C
  • Creeping Speed: 15-18m/min
  • IP Grade: Cleaner-IP68, Power supply unit-IPX4
  • Working Temperature: 10°C - 40°C
  • Pool Depth: 2.5m
  • Climb Slope: up to 25°

Usage Features

Connecting the Cleaner:

  1. Cable Connection: Plug the cable line into the socket on the power supply unit. Ensure the plug is in the correct direction and position, then fasten the nuts on both sides of the plug. Turn the round part of the plug to lock or loosen it.
  2. Power Connection: Connect the power supply unit to a suitable power outlet.

Operating the Cleaner:

  1. Placing the Cleaner: Gently lower the cleaner into the pool. Hold the cable by one hand and the cleaner handle by the other hand. Ensure the cleaner submerges into the water but above the floor. Release the rest of the cable after the cleaner falls onto the pool floor slowly. Avoid any turning upside down of the cleaner.
  2. Starting Operation: Use the control panel to select the desired pool distance and run time. Press the "AUTO RUN" button to start the automatic cleaning program.
  3. Nozzle Adjustment: The cleaner's nozzles can be adjusted to optimize the cleaning path. For different pool shapes (e.g., square, rectangular, round), specific nozzle angles (e.g., 30°, 45°, 75°) are recommended to ensure thorough cleaning. The operator can choose a proper nozzle position based on the pool size and shape.
  4. Stopping Operation: Press the "STOP" button to halt the cleaner.

Important Precautions:

  • This model is mainly applicable to swimming pools with flat floors.
  • Do not prevent severe damage to the cleaner; never power on the unit when it is outside of the swimming pool.
  • The power cord must be connected to a leakage protective device and appropriately earthed socket.
  • Do not operate the cleaner when people are in the pool.
  • Do not try to move the floaters along the electric cable. Leave them always in the original positions.
  • Before powering on, make sure the cable is fully released to avoid any winding, which could affect the cleaner's performance or cause damage.
  • The filter bags should be cleaned every time you use the unit. This will prevent the dirty filter bags from affecting the normal operation of the cleaner.
  • The cleaner should be stored in a cool and ventilated place, away from direct sunlight, when not in use.
  • The power supply unit should be placed in a shaded area. In order to avoid overheating and the potential damage of components, never cover the power supply unit.
  • Only authorized after-sales service personnel should open the cleaner's motor assembly and power supply unit; otherwise, the warranty will be invalidated.
  • In order to avoid any accident/damage, the power supply unit should be steadily placed at a minimum distance of 3.5m from the pool edge.
  • Do not use the cleaner beyond the working environment/conditions stated in this manual.
  • Do not uncover the protective film, which is sticked on the operating panel.
  • Close the filtering system of your pool when using this cleaner.

Note:

  • When putting into or lifting out from the pool, avoid any possible scratch to the pool surface.
  • Store the cleaner in a flat place; the cleaner body should not touch any hard article to avoid possible damage.
  • Do not press into or lift out the filter cartridge when installing or taking off to avoid any damage to the chassis.
  • Do not lift both sides of the filter cartridge at the same time.

Maintenance Features

Cleaning the Filter Bag:

  1. Unfold the Retaining Ring: Unfold the retaining ring and open the cleaner.
  2. Press the Buckle: Press the buckle of one side to lift the filter cartridge.
  3. Take Off the Filter Cartridge: Remove the filter cartridge.
  4. Open the Small Buckle: Open the small buckle and take off the filter bag to wash.
  5. Reinstall the Filter Cartridge: Reinstall the filter bag. Insert one side of the filter cartridge into the buckle. Press the buckle of the other side to put the filter cartridge in position.
  6. Replacing Filter Bag: Use a new filter bag in case the existing one is broken.

Helpful Tips:

  • Unplug the power connection immediately after use (do not do it with wet hand or naked foot).
  • The cleaner should not touch pool walls while lifting out to avoid scratching the pool surface or any damage to the cleaner.
  • Before lifting out from the pool and placing on the pool edge, suspend the cleaner above the water surface for 10-15 seconds to release the water left inside the cleaner body.
  • Please hold the cleaner handle to lift it out from the pool and never pull the cable.

Troubleshooting

The manual provides a troubleshooting guide for common issues:

  • Cable twists or coils up:
    • Possible Reason: Cable not fully released, nozzle in extra angle, obstruction in pool, stuck on main drain outlet of the pool, long time working.
    • Corrective Action: Unplug power line and release cable, adjust water outlet into proper angle, remove obstruction in pool, turn off pool filter system, release manually.
  • Cleaner does not reach all pool area:
    • Possible Reason: Power supply unit improperly positioned, nozzle in improper direction, customized pool shape, pool filter system and pump open, cable not long enough in pool, power cord not connected well.
    • Corrective Action: Place power supply in proper position so that cleaner can reach all area, adjust nozzle into proper direction, adjust the nozzle to lead to bigger moving radius, turn off pool filter system, release cable, plug power cord and cable line.
  • Cleaner does not work:
    • Possible Reason: Damaged during transportation, cleaner does not match local rated voltage.
    • Corrective Action: Contact local vendor.

Warranty

The product comes with a 2-year warranty, in accordance with Directive 1999/44/EC of 25th May regarding guarantees on the sale of consumer goods. The warranty is void if the product has been altered, misused, or repaired by unauthorized personnel. The warranty extends only to manufacturing defects and does not cover any damage resulting from mishandling by the owner. Sales invoices must be presented for any claim or repair during the warranty period.

The product also complies with Environmental Programmes, WEEE European Directive, indicating that it should not be disposed of with unsorted waste but should be recycled appropriately. Batteries should be removed before disposing of the product.

Winny HJ1009 Specifications

General IconGeneral
BrandWinny
ModelHJ1009
CategorySwimming Pool Cleaners
LanguageEnglish