13
TO CHANGE YOUR DEFAULT CAMERA:
1. Press “MENU”
2. Go to “Set Default” by pressing “ – “
3. Press “Parking Aid Line” to enter
4. Press “+ “ or “– “ to select Camera 1 or Camera 2
5. Press “Parking Aid Line” to conrm and exit
ROTATE IMAGE
You can rotate 180 degrees of the transmitted image signal and disable mirror imaging according to
your camera install orientation.
Note: Rotate Image setting ONLY works while the camera image is on the screen.
1. Press “MENU”
2. Go to “Rotate Image” by pressing “–“
3. Press “Parking Aid Line” to enter
4. Press “+” or “–“ to adjust the imaging rotation and mirroring
5. Press “Parking Aid Line” to conrm and exit
To Next Page
Loading...