- 22 -
satisfactory.
We have already set the channels according to the requirement in
different countries. Choose the country you are staying from the list to
get the correct channel.
• Network connection test
In case there are any issues in connecting Skytune, select this option to
check out any failed items of the network parameters for further
diagnosis.
Date and Time
The radio will set your local time automatically after the internet connection
is completed. If you want to do manual setting, change it by the following
options:
• Time zone
Auto-set Time Zone: This option is set by default.
Manual-set Time Zone: Choose this option if you want to set the time in
another region.
Choose and highlight the region/city you prefer and press OK to confirm.
Coupled with NTP (use network time) and DST (Daylight time saving)
will be adjusted automatically if you choose to use network time (NTP).
• Set Time Format
Choose either 12-hour or 24-hour notation you prefer.
• Set clock style
You can choose the clock display in digital form or Analog style. The
selected style will apply in Standby as well as the big clock display in
radio playback.
• Set Date Format
• DST (Day Light Saving)
Enable on/off
• NTP (Use network time)
NTP is designed to synchronize a device's clock with a time server. Your
Tuner will synchronize the time server by default every time it powers up
and connects to Internet. This ensures a very high degree of accuracy in
the Tuner's clock. You can change to use other time server by inputting
the URL address (see below NTP server). You can choose "Do not use
network time" if you don't want it to.
If you choose not to use NTP for clock synchronization, highlight the
NTP (Network time protocal) and press OK to make the change. You will
see the Set Date & Time appeared on the menu. Select it and adjust the
Configuration
To Next Page
Loading...